read more ...

 
   

 

Our Product Range .........

 
 
 
BACTERIOLOGICAL INCUBATOR (BOTTOM HEATER) BTI-25

We, Bio Technics India are the leading manufacturers, suppliers and dealers of Bacterial Incubator (Bottom heater) BTI - 25 which is designed & fabricated to suit and serve applications & necessities in the laboratory.

 

• Bacteriological incubators are sturdy double walled units.
• Inner chamber made of m.s./ stainless steel and outer chamber made of mild steel with powder coating.
• The gap between the wall fitted with glass wool insulation to avoid heat loses.
• warming elements are made of high-grade chrome plated nichrome wires.
• Temp. is controlled by a thermostat.
• Temp. range 5°C above ambient to 60°Cand accuracy. ( +2°C with digital accuracy of 0.5°C)
• Air ventilation is provided on the top of the unit to remove the hot gases.
• Incubator heaters are placed in the bottom side of the unit in the lab type industry.
• All the control switches and pilot lamps are fitted on the front panel
• Trays should be supplied with G.I. wire mesh..
 
Standard Sizes Available :

Size in Inches (In Cms.)
(H X W X D)
12" X 12" X 12"
(30 x 30 x 30 Cm.)
14" X 14" X 14"
(35 x 35 x 35 Cm.)
18" X 18" X 18"
(45 x 45 x 45 Cm.)
18" X 18" X 24"
(45 x 45 x 60 Cm.)
24" X 24" X 24"
(60 x 60 x 60 Cm.)
18" X 24" X 36"
(45 x 60 x 90 Cm.)
24" X 24" X 36"
(60 x 60 x 90 Cm.)
 
Optional Accessories :
 
• Air Circulation Fan For Uniform Temperature.
• Digital Temp. Controller Cum indicator in lieu of thermostat with an accuracy of + 0.5°C.
• S.S. Trays
 
 

BACTERIOLOGICAL INCUBATOR ( MEMMERT TYPE )BTI-26

 

  • Bactriological Incubators Are Sturdy Double Walled Units.
  • Inner Chamber Made Of S.S. And Outer Made Of Mild Steel  With Powder Coating.
  • Gap Between The wall Fitted With Glass Wool Insulation To Avoid Heat Loses.
  • Heating Elements Are Made Of High Grade Chrome Plated Nicrome Wire.
  • Temp. Is Controlled By Thermostat.
  • Temp. Range 5°C Above Ambient To 60°C And Accuracy. +2°C(With digital accuracy ±0.5°C
  • Air Ventilations Are Placed On Top Of Both Side To Remove Hot Gases / fumes.
  • In Memmert Type Unit Heaters Placed At The Right And Left Side Of The Inner Chamber.
  • All The Control Switches And Pilot Lamp Are Fitted On The Front Pannel.
  • Trays Should Be Supplied With G.I. Wire Mesh
 
Optional Accessories :
 
• Air circulation fan for uniform temperature.
• Digital temperature controller cum indicator in lieu of thermostat with an accuracy of + 0.5°C.C
• Stainless steel trays
.
 
Standard Sizes Available :

Size in Inches (In Cms.)
(H X W X D)
12" X 12" X 12"
(30 x 30 x 30 Cm.)
14" X 14" X 14"
(35 x 35 x 35 Cm.)
18" X 18" X 18"
(45 x 45 x 45 Cm.)
18" X 18" X 24"
(45 x 45 x 60 Cm.)
24" X 24" X 24"
(60 x 60 x 60 Cm.)
18" X 24" X 36"
(45 x 60 x 90 Cm.)
24" X 24" X 36"
(60 x 60 x 90 Cm.)
 
BACTERIOLOGICAL INCUBATOR (MEMMERT TYPE) BTI-04
 


  • Bactriological Incubators Are Sturdy Double Walled Units.
  • Inner Chamber Made Of S.S. And Outer Made Of Mild Steel WithPowder Coating.
  • Gap Between The Wall Fitted With Glass Wool Insulation To Avoid Heat Loses.
  • Heating Elements Are Made Of High Grade Chrome Plated Nicrome Wire.
  • Temp.  Is Controlled By Termostat.
  • Temp. Range 5c Above To 60° And Accuracy. +2°C.
  • Air Ventilation Are Placed  On Top Of Both Sides To Remove Hot Gases / Fumes.
  • In Memmert Type Unit Heaters Placed At The Right And Left Side Of the Inner Chamber
  • All The Control Switches And Pilot Lamps Are Fitted On The Front Panel.
  • Trays Should Be Suppliued With G.i. Wire Mesh.
Standard Sizes Available :

Size in Inches (In Cms.)
(H X W X D)
12" X 12" X 12"
(35 x 35 x 35 Cm.)
14" X 14" X 14"
(35 x 35 x 35 Cm.)
18" X 18" X 18"
(45 x 45 x 45 Cm.)
18" X 18" X 24"
(45 x 45 x 60 Cm.)
24" X 24" X 24"
(60 x 60 x 60 Cm.)
18" X 24" X 36"
(45 x 60 x 90 Cm.)
24" X 24" X 36"
(60 x 60 x 90 Cm.)
 
Optional Accessories :
 
• Air Circulation Fan For Uniform Temperature.
• Digital Temp. Controller Cum indicator in lieu of thermostat with an accuracy of + 0.5°C.
• S.S. Trays
 
BACTERIOLOGICAL INCUBATOR (BOTTOM HEATER)
 

  • Incubators Are Sturdy Double Walled Units.
  • Inner Chamber Made Of S.S. And Outer Made Of Mild Steel With Powder Coating.
  • Gap Between The Wall Fitted With Glass Wool Insulation To Avoid  Heat Loses.
  • Heating Elements Are Made Of High Grade Chrome Plated Nicrome Wire.
  • Temp. Is Controlled By Thermostat.
  • Temp. Range 5°C Above Ambient To 60° And Accuracy. +2°C
  • Air Ventilations Is Provided On TheTop Of the Unit To Remove The Hot Gases / Fumes.
  • In Lab Typoe Incubators Heaters Are Placed In The Bottom Side Of The Unit.
  • All The Control Switches & Pilot Lamps Are Fitted On The Front Pannel.
  • Trays Should be Supplied With G.I. Wire Mesh.
 
Standard Sizes Available :

Size in Inches (In Cms.)
(H X W X D)
12" X 12" X 12"
(35 x 35 x 35 Cm.)
14" X 14" X 14"
(35 x 35 x 35 Cm.)
18" X 18" X 18"
(45 x 45 x 45 Cm.)
18" X 18" X 24"
(45 x 45 x 60 Cm.)
24" X 24" X 24"
(60 x 60 x 60 Cm.)
18" X 24" X 36"
(45 x 60 x 90 Cm.)
24" X 24" X 36"
(60 x 60 x 90 Cm.)
 
Optional Accessories :
 
• Air Circulation Fan For Uniform Temperature.
• Digital Temp. Controller Cum indicator in lieu of thermostat with an accuracy of + 0.5°C.
• S.S. Trays
• Out Side Chamber Made Of stainless Steel.
 
 
 

 

:::: Contact Details ::::


3, Vaishali Mansion, Bldg.No.9,   Sorabji Santuk Lane, Dhobi Talao, Mumbai - 400002, Maharashtra, India
Tel. No :- (022) 65948121 / 64515653 Fax No.:- (022) 22058121

Website : www.biotechlabequipments.com, www.laboratoryequipmentsindia.in


 
 
   
 
 
      Designed & Hosted by : MID   Promoted by : GID